ESP2000D Amplifier with Control & Diagnostics Tool The ESP2000D is a two channel rack mountable power amplifier. The unit contains two separate 1000 watt amplifiers, two independent power supplies, (each channel running off each power supply), two signal paths, inputs and outputs as well as limiting and low frequency enhancement on each of the two […]
ESP4000 – Rack mounted, high definition amplifier The ESP4000 is an ultra high definition 4 channel rack mountable power amplifier from KV2 Audio, specifically designed for optimised performance with ESD loudspeakers, as well as with other passive systems. For the ESP4000 all electronic circuit boards are first mounted on individual aluminium heat sinks, then on […]
ESP2000 – Rack mounted, High definition amplifier The ESP2000 amplifier incorporates KV2’s SLA design principles, delivering very low distortion characteristics, even under extreme operation. Equally at home as a reference amplifier in a high-end recording studio or driving a large-scale live audio system, the ESP2000 is a sonically superb unit featuring Class H amplifier. The […]
ESP1000 – Rack mounted, High Definition Amplifier The ESP1000 is a four channel rack mountable power amplifier specifically designed for optimised performance with KV2 Audio’s ESD Cube / ESD1.10 subwoofer system. The unit contains four separate 250 watt amplifiers, two independent power supplies (two channels running off each power supply), four signal paths, inputs and […]
| -1dB Response | 3Hz to 40kHz |
| Channel Crosstalk | >70dB |
| Signal to Noise Ratio | >115dB |
| Total Harmonic Distortion | <0.005% (1W) / <0.01% (clip -1dB) |
| Amplifier Type | High Efficiency, Emitter coupled |
| Number of Channels | 2 |
| Total Output Power | 2000W |
| Max. Output Voltage | 78V (peak) per channel |
| Max. Output Current | 48A (peak) per channel |
| Minimum load impedance per channel | 2Ω |
| Out. Power 16Ω – 1 channel / 2 channels loaded | 175W / 160W (RMS) |
| Out. Power 8Ω – 1 channel / 2 channels loaded | 340W / 300W (RMS) |
| Out. Power 4Ω – 1 channel / 2 channels loaded | 600W / 500W (RMS) |
| Out. Power 2Ω – 1 channel / 2 channels loaded | 1000W / 800W (RMS) |
| Out. Power 16Ω – bridged | 600W (RMS) |
| Out. Power 8Ω – bridged | 1000W (RMS) |
| Out. Power 4Ω – bridged | 1500W (RMS), 2000W short term |
| Input Channels | XLR |
| Input Sensitivity | 1.55V |
| Input Impedance | 20kΩ (balanced) |
| Signal Output | XLR Through |
| Speaker Input | Neutrik Speakon®, 2x Binding posts |
Konstruktiv tænkning og konstant fokus på finpudsning af lydoplevelsen,
sikrer at vi altid når vores mål om at hæve niveauet.