VHD5.1

VHD5.1 Downfill

Continuing KV2 Audio’s current technology statement through Constant PowerPoint Source Array design, VHD5.1 is a dedicated downfill performance enclosure and integral to the VHD5.0 system for the largest of events to audiences from 10,000 upwards without requirement for additional delay systems.

A three-way design featuring a 3″ high frequency compression driver with NVPD treated dome assembly; one horn loaded 8″ mid range woofer featuring AIC technology and six front loaded 10” low mid woofers. All speaker components employ neodymium magnets to increase force, improve control and reduce weight.

Bespoke flyware to facilitate fast attachment and rigging employment.

Features

Professional Baltic Birch construction with wear resistant durable polymer paint coating
Dedicated bespoke flybar system
Very High Definition performance using KV2 Audio SLA Technology
135dB sustained output, 138dB peak
Controlled wide dispersion 110 x 40° Mid / High Horn
HF design employing state of the art 3’ (76mm) NVP Titanium Diaphragm compression driver, with CG phase plug and Neodymium magnetic structure for higher output, exceptionally low distortion and extended frequency response
Neodymium transcoil 8” mid range woofer with 3” (76mm) voice coils, for increased control and reduced weight
Six neodymium 10” low mid woofers with 3” (76mm) voice coils for increased control and reduced weight
Three – way Active Driven via dedicated VHD5100 control and amplification
Propriety side and rear handle design for simplified and fast handling and moving
Complete VHD locking wheel boards and protection cover system

System Acoustic Performance

Max SPL Long-term	135dB
Max SPL Peak	138dB
-3dB Response	55Hz – 22kHz
-10dB Response	45Hz – 30kHz
Impedance	12Ω
Crossover Point	400Hz, 2,5kHz

High Frequency Section

Acoustic Design	Horn Loaded
High Horn Coverage Horizontal / Vertical	110° x 40°
High Frequency Amplifier Requirement	100W
Throat Exit Diameter / Diaphragm Size	1.4″ / 3″
Diaphragm Material	Nitride Titanium
Magnet Type	Neodymium

High Frequency Amplifier Specification

Type

VHD5100

Mid Range Section

Acoustic Design	Horn Loaded
Mid Horn Coverage Horizontal / Vertical	110° x 40°
Midrange Amplifier Requirement	200W
Woofer Size / Voice Coil Diameter / Design	8″ / 3.0″ / Trans Coil
Diaphragm Material	Epoxy Reinforced Cellulose
Magnet Type	Neodymium

kvalitet

Konstruktiv tænkning og konstant fokus på finpudsning af lydoplevelsen,
sikrer at vi altid når vores mål om at hæve niveauet.

Læs mere