The future of sound Made perfectly clear
ban-01_29

The Kingdom of Perfectly Clear Sound

ban-02_31

The Kingdom of Perfectly Clear Sound

EPAK2500 Control of Your ES System

 

epak2500_46

The EPAK 2500 is a four-way, active control and amplification unit specifically designed for the ES Series modular loudspeaker system. It not only houses all signal processing and four individual amplifiers but also controls the allocation of power depending on the number of bass modules employed. Unlike other active speaker systems, the EPAK 2500 allows placement of critical electronics remotely.​

The EPAK 2500 is enclosed in a road-rugged Baltic birch cabinet with two corner handles and a built in cable storage compartment. Inside, the electronics mechanical assembly is mounted on an independent suspension system that isolates it from the shocks and impacts typically encountered on the road. A large aluminium heat sink provides passive cooling along with two demand-sensitive fans for added reliability. To achieve increased output and throw
​you can set up two ES 1.0 cabinets to work together horizontally as a single loudspeaker system. This configuration will require two EPAK 2500/R’s per side and the use of the ‘Two per side’ switch to engage a specific set of filters and operating parameters required in this mode.

Applications

  • Very high quality fixed installations.
  • Professional portable PA Systems for large format AV speech and multimedia playback.
  • Medium – sized live music applications.
  • Professional Mobile DJ with ES 1.0 and ES series subwoofers.

Specifications

High Frequency Amplifier Specification

​Type ​Class AB Push-Pull low inter-modulation Mosfet design with transformer balanced output
​​​Rated Continuous Power            100W
Distortion​ <0.05%
Operating Bandwidth​​ 2.5kHz ÷ 28kHz

Mid Frequency Amplifier Specification

​Type ​Class AB Push-Pull low inter-modulation Mosfet design with transformer balanced output
​​​Rated Continuous Power           200w
Distortion​ <0.05%​​
Operating Bandwidth​​ 500Hz – 2.5kHz​​

Mid-Bass Frequency Amplifier Specification

Type​ ​High efficiency, Low frequency, Current-enhancing switch mode
Rated Continuous Power     ​600W
Distortion​ <0.05%​​
Operating Bandwidth​​ ​​​130Hz – 500Hz

Low Frequency Amplifier Specification

Type ​High efficiency, Low frequency, Current-enhancing switch mode
​​Rated Continuous Power 1600W​
​​Distortion <0.05%​
​​Operating Bandwidth 20Hz ÷ 130Hz​

Signal Input

​Input Sensitivity 1.0V RMS
Input Impedance​ 20kΩ (balanced)

​Speaker Output

Speaker Output​ EP6 (Mid-Hi), EP4 (Sub)

​​Power

​​Power Connector Neutrik PowerCon®
Operating Voltage 100÷120V@60Hz |
Range 205÷240V@50Hz | 225÷260V@50Hz
​Recommended 20A 115V | 10A 230V |
Amperage 10A 250V

​​Product Number

KVV 987 001EPAK2500 115V

KVV 987 000 – ​EPAK2500 230V

KVV 987 134 – ​EPAK2500 250V

​Physical Dimensions

Height ​700mm (27.55″)
Width 450mm (17.71″)
Depth 290mm (11.41″)
Weight 32kg (70.4lbs)